MGS
Manufacturing

HALL
Industries
The MGS Group
MGS POSL SERIES SHAFTLESS PAYOFFS

The MGS Series POSL Shaftless Payoffs are engineered and constructed for many years of trouble free service.

The Payoffs have the same frame, the same capacity, and the same user-friendly features as the popular MGS TUSL Shaftless Takeups.

Our Payoff line includes seven sizes accommodating reels from 20" to 120" in diameter and from 12" to 84" in outside width.  An outstanding feature is the extremely broad range of reels that each size machine will accept.

For operator convenience, a control station for up, down, open, and close is located at each side.  These are equipped with pushbuttons or joysticks according to customer preference.

Safety features are extensive.  Lift arms will move only when the spring return buttons or joysticks are depressed.  Elevated reels are locked in place by a pilot operated check valve on each cylinder.  Reels are lowered by gravity at a controlled rate and cannot be forced against the floor.  Arms can be stalled in any direction without harm to the machine.

FEATURES

Brake System
A caliper and disc air brake is standard on non-driven Payoffs.  This is controlled by a pressure regulator and a manual on/off valve.


Pintles
Long-wearing case hardened pintles are bolted in place to permit easy exchange when required. 

Shafts are supported by ball bearings on smaller machines, and by spherical roller bearings on larger models.

Construction
Frame side members are of welded steel plate with double walls in areas of greatest stress.  Lift arms are of rectangular steel tubing, giving a modern clean appearance as well as great strength.

Electrical Equipment
Controls are housed in a NEMA 12 enclosure with a disconnect switch.  These include a starter for the hydraulic pump motor and a 110 volt control transformer.  Input is 460/3/60 unless otherwise specified.

OPTIONAL EQUIPMENT

Dual Horizontal Arm Drive
This makes it possible to load reels which are not centered.  One pintle will engage the reel before the other and stall.  The other will continue to move until engaged.

Drive
Payoffs can be equipped with drives when required.

Dual Level Brake
This includes two pressure regulators and a solenoid valve to provide normal braking and a stop mode.

High Capacity Brake
This optional brake will continuously dissipate as much as five horsepower.

CAPACITY

 

DIMENSIONS

PAYOFF
MODEL
MAX / MIN
REEL DIA.
MAX / MIN
REEL OAW
REEL WT
LBS
  PAYOFF
MODEL
DIMENSIONS IN INCHES
A B C D E F G
POSL-48 48" / 20" 36" / 12" 8,000 POSL-48 78 7/8 44 76 7/8 41 33 50 52 ½
POSL-60 60" / 20" 48" / 12" 12,000 POSL-60 95 ¾ 57 92 ¾ 55 32 64 ¼ 61 ½
POSL-72 72" / 26" 51" / 12" 14,000 POSL-72 101 ½ 61 98 ½ 59 32 70 ¼ 67 ½
POSL-84 84" / 30" 61" / 12" 20,000 POSL-84 112 68 ½ 108 66 ½ 36 78 ¼ 74 ½
POSL-96 96" / 40" 78" / 14" 30,000 POSL-96 145 82 ½ 140 80 ½ 41 ¼ 90 ¾ 89
POSL-108 108" / 40" 84" / 14" 35,000 POSL-108 156 84 ¾ 153 ½ 73 41 ¼ 95 ½ 92 ½
POSL-120 120" / 40" 84" / 14" 40,000 POSL-120 156 97 ½ 153 ½ 86 41 ¼ 104 105 ¼

The MGS Group designs and manufactures product handling solutions which include Payoffs, Takeups, Dancers, Accumulators, Measuring Machines, and Capstans to handle most any product from sensitive optical fiber to 1000MCM (507-mm2) power cable.  We also can handle odd shapes, tubing, ribbon, and tape.  Our Automatic and Semiautomatic Takeups are extremely reliable for on-line packaging of a wide range of products and reels at high speeds, resulting in significant cost savings.

Machines that are built to meet the specifications of the individual customer is a characteristic of The MGS Group systems.

Comprehensive design and engineering capabilities together with meticulous manufacturing techniques and careful testing assure customer satisfaction.  Some say we design machines with the user in mind.  We like to think we're in the business of solving problems for other businesses - like yours!

The MGS Group
MGS Manufacturing, Inc.
Physical:  122 Otis Street
               Rome, NY 13441
Mailing:   PO Box 4259
               Rome, NY 13442-4259
Tel 315.337.3350 ext. 110
Fax 315.337.4502
E-Mail: sales@mgshall.com
Web Site: www.mgshall.com
HALL Industries
Physical:  8C Commerce Dr.
               North Branford, CT 06471
Mailing:   P.O. Box 4259
               Rome, NY 13442-4259
Tel 203.481.4275 ext. 110
Fax 203.483.5391
E-Mail: sales@mgshall.com
Web Site: www.mgshall.com
Northampton Machinery Co.
Physical:  122 Otis Street
               Rome, NY 13441
Mailing:  PO Box 4259
              Rome, NY 13442-4259
Tel 315.337.3350 ext. 110
Fax 315.337.4502
E-Mail: sales@mgshall.com
Web Site: www.mgshall.com
Northampton Machinery Co.
7 Deer Park Road
Moulton Park Industrial Estate
Northampton NN3 6RX
England
Tel +44 (0) 1604 782220
Fax +44 (0) 1604 782230
E-Mail: sales@nmc.co.uk
Web Site: www.nmc.co.uk
Return to MGS/Hall Home Page
Return to MGS/HALL Homepage