CONE PINTLE POWERED PAYOFF

This design is ideally suited where primarily one size reel is to be run.  For smaller reels we can supply a ramp.  As an option, a powered lift could be added.

One of the main advantages to this design is the short time required to change reels.  The sliding spindle shaft is easily opened, the empty reel is rolled through the unit, and the next full reel is already in position to roll into the Payoff.

This design has sizes available to accept reels from 12-inch to 50-inch.  Payoff can be in either direction or forward.

Multiple units can be mounted on the same frame.

FEATURES

Spindle
Each spindle is fitted with a hardened replaceable cone shaped end.  One side, (the idle side), is fitted with a sliding splined shaft operated by two air cylinders.  When the reel is rolled in place, the operator presses the close button and the air cylinder operated cone on the left side moves inwardly.  This slides the reel slightly onto the other cone and the reel is lifted to clear the floor by approximately ½-inch.

The drive spindle is fitted with a Neoprene driving disc.  This eliminates the need to line up a drive dog.

Controls
Drive cabinet and operator controls are conveniently located on the Payoff.  Door safety disconnects and 115 VAC control transformers are included.  The unit will be wired for 230 or 480 volts.


Dancer
This can be an air cylinder or weighted design Dancer with UHMW sheaves.  The size and style would be provided according to specific Customer requirements.  The Dancer can be attached or a separate freestanding unit.

30-Inch Single Position Layout

The MGS Group designs and manufactures product handling solutions which include Payoffs, Takeups, Dancers, Accumulators, Measuring Machines, and Capstans to handle most any product from sensitive optical fiber to 1000MCM (507-mm²) power cable.  We also can handle odd shapes, tubing, ribbon, and tape.  Our Automatic and Semiautomatic Takeups are extremely reliable for on-line packaging of a wide range of products and reels at high speeds, resulting in significant cost savings.

Machines that are built to meet the specifications of the individual customer is a characteristic of The MGS Group systems.

Comprehensive design and engineering capabilities together with meticulous manufacturing techniques and careful testing assure customer satisfaction.  Some say we design machines with the user in mind.  We like to think we're in the business of solving problems for other businesses - like yours!